Structural features of zinc hydroxyfluoride

Zinc hydroxyfluoride (ZnOHF), obtained by coprecipitation of a zinc salt in aqueous HF, exhibits a variable stoichiometry Zn(OH)_2−xF_x, where x is tuneable from 0.63 to 0.87 by controlling the pH of the solution. The structure was determined from Rietveld refinements using X-ray powder diffraction data. Crystallizing with the orthorhombic symmetry (SG : Pna2₁), the ZnOHF-type structure exhibits two different anionic sites. A bond valence analysis shows that fluorine exclusively occupies the anionic site that has shorter contacts to zinc. This site is split into two partially occupied sites, one corresponding to the position of a fluoride ion and the other to the position of a hydroxide ion. Bond valence calculations show that the split site model gives a more accurate picture of the local coordination of the anions on this site.     

Analysis of the Electron Localization, the Anisotropy of Electrical Conductivity, the Orbital Ordering, and Spin-Exchange Interactions in BaVS3 on the Basis of First Principles and Semi-empirical Electronic Structure Calculations

The electrical transport and magnetic properties of BaVS₃, made up of individual VS₃ octahedral chains, were examined on the basis of first principles and tight-binding electronic structure calculations. The electrical conductivity of BaVS₃ is nearly isotropic despite its one-dimensional structural feature, because of the orbital interactions associated with the short S···S contacts within each VS₃ chain and between adjacent VS₃ chains. The probable cause for the metal-insulator transition at ∼70 K was examined in terms of first principles electronic structure calculations, which indicate that the metallic and magnetic insulating states of BaVS₃ are nearly the same in energy. This is consistent with the observation that the metal-insulator transition at ∼70 K is caused by electron localization. The observed magnetic properties of BaVS₃ below ∼70 K are readily explained under the assumption that the symmetry-broken t_2g-orbitals act as the magnetic orbitals in the magnetic insulating state of BaVS₃. The probable cause for the latter was discussed.     

Magnetic,Mössbauer and optical spectroscopic properties of the AFe3O(PO4)3 (A = Ca,Sr, Pb) series of powder compounds

AFe₃O(PO₄)₃ (A = Ca, Sr and Pb) powder compounds were studied by means of X-ray diffraction (XRD), electron-probe microanalysis (EPMA) coupled with wavelength dispersion spectroscopy (WDS), Raman and diffuse reflectance spectroscopies, specific heat and magnetic properties measurements. Magnetization, magnetic susceptibility and specific heat measurements carried out on AFe₃O(PO₄)₃ (A = Sr, Ca and Pb) powders firmly establish a series of three ferromagnetic (FM)-like second order phase transitions spanned over the 32–8 K temperature range. Room temperature Mössbauer spectroscopy and associated DFT calculations confirm the existence of three crystallographically non equivalent Fe³⁺ sites in the three compounds. Mössbauer spectra recorded as a function of temperature in the PbFe₃O(PO₄)₃ compound also establishes the occurrence of two purely magnetic and reversible phase transitions at 32 and 10 K. Diffuse reflectance measurements reveal two broad absorption bands at 1047 and 837 nm, in both PbFe₃O(PO₄)₃ and SrFe₃O(PO₄)₃ powders, with peak cross sections ∼10⁻²⁰ cm² typical of spin-forbidden and forced electric dipole intraconfigurational transitions.     

钴掺杂Sr1.5La0.5MnO4的合成及高温电化学性能研究

采用EDTA-柠檬酸法合成了中温固体氧化物燃料电池阴极材料Sr_1.5La_0.5Mn_1-xCo_xO₄（SLMCO_x）,并利用粉末X射线衍射（XRD）、X射线光电子能谱（XPS）以及电化学交流阻抗谱（EIS）进行表征。结果表明,该材料与Ce_0.9Gd_0.1O_1.95（CGO）在1 200℃烧结12 h不发生化学反应。随着Co掺入量的增加,氧化物中Mn³⁺和Co²⁺含量增多,晶格氧含量降低,晶格畸变率增大。交流阻抗谱（EIS）测试结果显示,钴的掺杂明显降低电极的极化电阻,其中Sr_1.5La_0.5Mn_0.7Co_0.3O₄阴极在700℃空气中的极化电阻为0.62 Ω·cm²,明显小于Sr_1.5La_0.5MnO₄阴极在750℃的极化电阻（1.5 Ω·cm²）,表明钴掺杂的Sr_1.5La_0.5Mn_1-xCo_xO₄是一种潜在的IT-SOFC阴极材料。     

中温固体氧化物燃料电池阴极材料LaBiMn2O6的制备与性能研究

采用固相法合成了中温固体氧化物燃料电池(IT-SOFCs)阴极材料LaBiMn₂O₆,并利用X射线衍射(XRD)和电化学阻抗谱(EIS)进行表征.结果表明该材料与电解质Ce_0.7Bi_0.3O_1.85(CBO)在1 000 ℃烧结12 h不发生反应.交流阻抗和直流极化测试结果发现,阴极极化电阻随测试温度的增加而逐渐减小,700 ℃空气中的极化电阻为0.71 Ω·cm²;氧分压测试结果显示,在600~700 ℃范围内,电极反应的速率控制步骤为电极上发生的电荷转移反应.电极过电位为85 mV时,700 ℃的阴极电流密度达到 216 mA·cm^-2 ,表明LaBiMn₂O₆是一种潜在的中温固体氧化物燃料电池(IT-SOFCs)阴极材料.     

Sol-gel technique for the generation of europium-doped mesoporous and dense thin films: A luminescent study

In this paper, a series of europium-activated titania mesoporous and dense thin films were prepared by sol-gel process. Structural characterizations show that high europium ion loadings can be incorporated into titanium dioxide walls without destroying the mesoporous arrangement. However, high europium content locks the titanium dioxide crystallization process. Upon 10% europium ions loading, mesoporous thin films are mainly amorphous, whereas dense ones are still partially crystallized. Eu³⁺ ion luminescence has been investigated by exciting through the semiconductor host lattice. Emission features reveal that europium ions adopt similar environments (nanocrystalline and glassy-like ones) in both dense and mesoporous thin films. Fluctuations of europium emission under continuous UV excitation have been observed. One observes that the effect strongly depends on the thin films’ crystalline character which is strongly related with the texturation and existence at the mesoscopic length scale.     

Reinvestigation of the OP4-(Li/Na)CoO2-layered system and first evidence of the (Li/Na/Na)CoO2 phase with OPP9 oxygen stacking

The composition and synthesis conditions of the (Li/Na)CoO(2) phase with an ordered 1:1 Li/Na stacking alternating with CoO(2) slabs were determined from a careful study of the P2-Na(～0.7)CoO(2)-O3-LiCoO(2) system. An in situ X-ray diffraction (XRD) thermal study emphasizes the metastable character of this phase that can be stabilized only by very fast quenching. Its composition, (Li(0.42)Na(0.37))CoO(2), is significantly different from the ideally expected one, (Li(0.50)Na(0.35))CoO(2), and its structure, confirmed by Rietveld refinement of the XRD pattern, presents an ideal alternate ordering of lithium, cobalt, and sodium layers within OP4-type oxygen packing. The presence of vacancies in both alkali-ion layers was confirmed by electrochemical intercalation of lithium and sodium. For the first time, a new type of layered oxide exhibiting OPP9-type oxygen packing was evidenced. Between the CoO(2) slabs, alkali ions are intercalated in the following order: Li(octa)-Na(prism)-Na(prism). This material crystallizes in the R3m space group with a(hex) = 2.828 ? and c(hex) = 46.85 ? cell parameters.     

Correlation between Luminescence and EPR Spectroscopy as Evidence of Ytterbium Pair Formation in Li6Ln(BO3)3:Yb3+ (Ln=Gd,Y) Borate Single Crystals

Synthesized powders and grown single crystals of nominal compositions Li₆Ln(BO₃)₃:Yb³⁺ (Ln=Y, Gd) were investigated by means of powder and single‐crystal X‐ray diffraction (XRD), as well as optical near‐IR spectroscopy in conjunction with electron paramagnetic resonance (EPR) spectroscopy. The appearance of two distinct zero‐phonon lines suggests the existence of two kinds of Yb³⁺ ions in the single crystals. The XRD results exclude the possibility of a phase transition occurring between room and low temperatures. EPR spectra of single crystals show the presence of both isolated ions and pairs of ytterbium ions substituted for Y³⁺. A strong temperature dependence of the intensity of Yb–Yb pairs resonance lines coincides with temperature dependence of emission peak at 978 nm, confirming a common origin of the defect giving rise to these spectra. Calculated from EPR spectra, the distance between pairs of Yb³⁺ is in good agreement with crystallographic ones: R=3.856 Å, R_cryst=3.849 Å.     

Evaluation of activation in medical products from electron beam processing at energies slightly above 10 MeV

Standards for radiation sterilization of health care products require evaluation of the potential for induced radioactivity for electron beam energies greater than 10 MeV. Measured energy for a 10 MeV accelerator may be slightly higher, which could fall under the requirement. The evaluation method in this paper uses a pathways analysis method to estimate individual dose, which is compared against the estimate of induced activity. Based on this comparison, the amount of induced activity at 10.4 MeV beam energy does not present a significant individual risk from exposure to the irradiated device.     

The magnetic entropy change in the double perovskite La2NiMnO6 with strong spin–phonon coupling

The magnetocaloric effect and the critical behavior of La₂NiMnO₆ are investigated by measurement of the magnetization around $T_C$. The magnetic entropy change $\left|\Delta S\right|$ of La₂NiMnO₆ for a field change of 0–45 kOe near the Curie temperature is about 5% of the theoretical expectation. The critical behavior of the La₂NiMnO₆ deviates from the mean field theory. These abnormal phenomena are understood in the context of the strong spin–phonon coupling in La₂NiMnO₆. It is suggested that a method of modulating this coupling would enhance the magnetic entropy change greatly, which makes the La₂NiMnO₆ a promising candidate for room-temperature magnetic refrigeration.